geoheiBB

Posted: **Monday, 19.09.2005 07:50**

How can I disable the icon of the Windows Security Center (only after SP2 installation) in the task bar?

It pops up the message "Your computer might be at risk" from time to time.

Thanks,

Posted: **Monday, 19.09.2005 12:47**

You can either change the way the Security Center alerts you in the "Control Panel > Security Center" or disable the Security Center completely.
I don't know if there is an option like "hide icon in taskbar" for the Security Center.

Posted: **Monday, 26.09.2005 07:47**

1. As far as I could see, you cannot enable/disable the Firewall in the Security Center, right?

2. When I go to "Network and Internet connection" > "Windows Firewall", I disabled the firewall. On top of this, all "Network Connection Settings" in the "Advanced" tab of the "Windows Firewall" are disabled. Nevertheleww, the Security Center shows that the firewall is on. Any explanation for this?

TIA

Posted: **Monday, 26.09.2005 09:44**

... found later ...

Kerio 4.1.3 is installed on the system and properly transmits to WinXP the activated thrid party firewall status.

So that's why the Security center showed an ctive firewall.

Posted: **Monday, 26.09.2005 11:01**

geohei wrote:1. As far as I could see, you cannot enable/disable the Firewall in the Security Center, right?

There is a way. Mine is i.e. not started => disabled.

Code: Select all

The Security Center is currently unavailable because the "Security Center" service has not started or was stopped. Please close this window, restart the computer ...

I think I did that through disabling the 3 different items that Security Center checks (updates, antivirus software and firewall).
I also unchecked these 3 items in the option "the way Security Center alerts me".

HTH

Posted: **Monday, 26.09.2005 11:47**

jc wrote:There is a way. Mine is i.e. not started => disabled.

In this case, you also don't have any other installed. Otherwise it would show that the firewall is enabled.

jc wrote:
Code: Select all
The Security Center is currently unavailable because the "Security Center" service has not started or was stopped. Please close this window, restart the computer ...
I think I did that through disabling the 3 different items that Security Center checks (updates, antivirus software and firewall).
I also unchecked these 3 items in the option "the way Security Center alerts me".

Hmmm ... disabling the service is not recommended, since it is also used for some other applications. I don't recall where I got this from, but the firewall service should remain started, even if the firewall itself is off.

I'll give it a try in the newsgroups, to see if it's possible to get rid of the icon.

Posted: **Tuesday, 27.09.2005 10:34**

geohei wrote:I'll give it a try in the newsgroups, to see if it's possible to get rid of the icon.

Here we go ...

Hallo Georges Heinesch

geh einfach in die Systemsteuerung ->Sicherheitscenter und dann auf der linken Seite "Warnungseinstellungen des Sicherheitscenters ändern"

Georges Heinesch schrieb:

> Hallo.
>
> Besteht die Möglichkeit das Windows Security Center Icon in der Taskbar
> irgendwie abzuschalten?
>
> Es ist mehr als nervend wenn ständig die Warnung kommt Firewall usw.
> wären abgeschaltet.
>
> Grüße,

Posted: **Tuesday, 27.09.2005 12:30**

geohei wrote:Here we go ...

Hallo Georges Heinesch

geh einfach in die Systemsteuerung ->Sicherheitscenter und dann auf der linken Seite "Warnungseinstellungen des Sicherheitscenters ändern"

Should be the "the Way Security Center alerts me" link in the Security Center, shouldn't it?

Posted: **Tuesday, 27.09.2005 21:16**

jc wrote:Should be the "the Way Security Center alerts me" link in the Security Center, shouldn't it?

Right

Disablig all makes the Security Center alerting system shut up